Lotus Europa Series 2 Spyder Double Wishbone Rear Suspension and Driveshaft Conversion (R.S.C.)
Spyder twin wishbone and final drive shaft conversions are suitable for the Lotus Europa range fitted with a Spyder spaceframe chassis.
Our sophisticated rear suspension conversion offers remarkable improvements in reliability, handling and road holding. It also takes full advantage of the latest tyre technology.
Designed to accept original drum brake layout.
Europa Series 2 Conversion Kit | COCX003 | £3106.62 |
---|
The major components of the Europa Series 2 kit (COCX003) are as follows:
2 x Wishbones: Lower Rear | COWB009 | £103.45 Each |
4 x Bushings: Lower Rear Inner | 21BU002 | £8.70 Each |
4 x Bushings: Lower Rear Outer | 21BU003 | £7.30 each |
1 x Bolt Kit: Lower Rear Outer | 21BK005 | £9.40 |
1 x Bolt Kit: Lower Rear Inner | 21BK004 | £11.60 |
1 x Hub Carrier: L/H | COCH004 | £195.00 |
1 x Hub Carrier: R/H | COCH003 | £195.00 |
4 x Wheel Bearings | 07BR019 | £16.75 Each |
2 x Seals | COSE005 | £6.58 Each |
4 x Circlips: Large | 08NB001 | £0.96 Each |
2 x Shim Seal | 01SC001 | £2.26 Each |
2 x Bearing Spacers | COSC009 | £14.95 Each |
2 x Hub Spacers | COSC005 | £17.95 Each |
2 x Tapered Lock Rings | COSC003 | £18.95 Each |
2 x Castelated Nuts: 3/4″ UNF | CONB006 | £3.45 Each |
2 x Split Pins: 4mm x 40mm | 24NB077 | £1.00 Each |
2 x Outboard Drive Shafts | COSH002 | £146.00 Each |
2 x Intermediate Drive Shafts: 2.750″ A/F | COSH003 | £139.00 Each |
2 x Rubber Drive Couplings | 01MG017 | £108.89 Each |
2 x Universal Joints: 2.750″ A/F Yoke | 11UJ001 | £18.75 Each |
1 x Wishbone: Upper Rear L/H | COWB020 | £82.90 |
1 x Wishbone: Upper Rear R/H | COWB019 | £82.90 |
2 x Bushings: Upper Rear Outer | 21BU003 | £7.30 Each |
4 x Bushings: Upper Rear Inner | 19BU004 | £7.30 Each |
1 x Brake Hose Kit: Front and Rear | COBH014 | £44.95 |
2 x Springs: Chrome Vanadium 1.9″ id 100lb/” | COSP019 | £36.80 Each |
1 x Brake Pipe: Rear 4 Way Union – R/H Hose | COBH033 | £6.80 |
1 x Brake Pipe: Rear 4 Way Union – L/H Hose | COBH032 | £6.80 |
Plus all the necessary high tensile bolts, nyloc nuts, washers, stainless steel locking wire etc to attach the above items to a chassis with the required brackets
Ordering
To place an order, for more information about our products, stock information or to talk through your requirements with our team please get in touch:
[email protected]
Phone