|
Technical Specification
Engine
| TYPE |
Front mounted Ford Zetec 2 Litre 16 valve double overhead
cam |
| WEIGHT |
118kg |
| POWER |
160 - 220 brake horsepower (depending on state of engine
tune) |
| TORQUE |
130 - 170 lb ft (depending on state of engine tune) |
| SPEED |
130 mph + (depending on state of engine tune) |
| 0 - 60 |
6 seconds or less (depending on state of engine tune) |
Transmission
|
TYPE |
Ford MT75 5 speed |
| RATIOS |
1 3.89-1 |
| |
2 2.08-1 |
| |
3 1.34-1 |
| |
4 1.00-1 |
| |
5 0.82-1 |
| |
Rev 3.51-1 |
| WEIGHT |
30kg (dry) |
Final Drive
| TYPE |
Ford Scorpio 7.5" |
| RATIO |
3.64 - 1 with viscous limited slip differential |
| DRIVE |
Solid driveshafts with twin cv joints |
Chassis
| TYPE |
Steel spaceframe splayed and braced front and rear |
| FINISH |
Shotblasted, zinc- based primer and top coated with
coloured stove enamel paint. |
Suspension
| FRONT |
Fully independent with unequal length upper and lower
Spyder wishbones incorporating adjustable coil damper units with anti
roll bar. |
| REAR |
Fully independent with unequal length upper and lower
Spyder wishbones incorporating adjustable coil damper units with anti
roll bar. |
| STEERING |
Rack and pinion castor 3.5 deg + or - 0.5 deg |
Brakes
| TYPE |
Hydraulic dual circuit |
| FRONT |
10.250" ventilated (outboard) |
| REAR |
10.00" solid (outboard) |
| HANDBRAKE |
centrally mounted mechanical handbrake lever action on
rear discs |
Wheels
| TYPE |
Minilite pattern 4.25" P.C.D bolt on |
| SIZE |
6J x 14" |
Tyres
Dimensions
| WHEEL BASE |
96" |
| TRACK FRONT |
54" |
| TRACK REAR |
55" |
| LENGTH |
168.75" |
| WIDTH |
66.25" |
| HEIGHT |
47" |
| GROUND CLEARANCE |
6.5" (design) |
| WEIGHT (UNLADEN) |
863kg 1898lb |
In the interest of continued development Spyder
reserves the right to change the designs and specification at any time.
|