TUBULAR WISHBONES

Spyder  lower rear wishbones are made from flat sided oval tubing to resist bending under braking. They may be used either as direct replacements for the Lotus originals - prolonging the life expectancy of the strut inserts, or as part of a complete Spyder double wishbone system.

CB-PG3 ELAN LR WISHBONES.jpg (35131 bytes)

CB-PG3 PLUS2 LR WISHBONES.jpg (39404 bytes)

Elan Lower Rear Wishbones

Plus Two Lower Rear Wishbones

Spyder wishbones are available finished in black powder coat, or to special order in polished nickel.

Rubber bushings supplied and press fitted as required.

Wishbones with pick-ups for anti roll bar drop links and adjustable wishbones to accept rod end bearings are produced to order.