AT THE BEGINNING OF 1979

TUBULAR WISHBONES WERE THE ONLY PRODUCTS WE HAD TO OFFER THE LOTUS OWNER.

The selection of Spyder components shown above consists of: Road going front and adjustable upper front with rod end bearings together with a special competition adjustable front anti roll bar, drop link and oilon mounting, mini steering rack, track rod extension, alloy front hub, chrome vanadium spring and gas assisted front damper with adjustable spring seat and locking ring.

Although they've been copied by many over the years the genuine Spyder wishbones are still the best, and, suprisingly still the best value.

CB-PG3 ELAN UF WISHBONES.jpg (38775 bytes)

CB-PG3 ELAN LF WISHBONES.jpg (43025 bytes)

CB-PG3 PLUS TWO UF WISHBONES.jpg (50437 bytes)

CB-PG3 PLUS TWO LF WISHBONES.jpg (48318 bytes)

Elan Upper Front Wishbones

Elan Lower Front Wishbones

Plus Two Upper Front Wishbones

Plus Two Lower Front Wishbones

Imitations often lack wrapped ends, or are poorly constructed from inferior materials.

Spyder wishbones are available finished in black powder coat, or to special order in polished nickel.

Rubber bushings are supplied and press fitted as required.

page 2