|
Page 2
Issue 8002
FRONT SUSPENSION AND STEERING
DAMPERS
| SPAX FIXED. SPRING SEAT TC |
CODA009 |
£89.90@ |
|
SPAX FIXED. SPRING SEAT S2 |
CODA010 |
£89.90@ |
| SPAX ADJ. SPRING SEAT S2 |
CODA011 |
£99.90@ |
|
SPAX ADJ. SPRING SEAT TC |
CODA008 |
£99.90@ |
SPRINGS
Front. Designed by Spyder and manufactured in chrome
vanadium.
| SERIES 2: (1.9 INNER DIAMETER)
|
05SP012
|
£34.50@
|
| TC & SPECIAL: (2.25 INNER DIAMETER)
|
COSP011
|
£45.50@
|
The free and loaded lengths of the Spyder chrome vanadium front springs may
differ from the original. To obtain the correct normal ride height we recommend
a damper open dimension of 11.25" for the series 2 model and 10.625" -
10.750" for the Twin cam and Special models.
This measurement refers to the dimension between the upper and lower damper
mounting centres and should be taken under the correct conditions. (see notes on
page 4 under " rear suspension information"). Since the weight of the
sprung mass can vary from car to car (weight of body shell and contents) fitting
damper units with adjustable spring seats is the most effective way of achieving
correct ride heights.
| ANTI ROLL BAR: UPRATED ROAD TYPE. C/W RUBBER BUSHINGS |
COAB002 |
£78.00 |
| UNIVERSAL JOINT: RACK TO COLUMN. C/W BOLTS, WASHERS
& NYLOC NUTS |
43UJ004
|
£18.95
|
| TRACK ROD ENDS: LOCKHEED
|
07BJ004
|
£11.75@
|
| GAITERS: STEERING RACK
|
11SK009
|
£16.20**
|
| UPPER FRONT BALL JOINTS: Fitted with the correct boots
to suit all types of upper front wishbones.
|
24BJ001
|
£19.20@
|
| FRONT UPRIGHTS L/H
|
29HC008
|
£59.95
|
| FRONT UPRIGHTS R/H
|
29HC007
|
£59.95
|
| STUB AXLES
|
29SH005
|
£31.60
|
| WHEEL BEARING KIT C/W Felt seals
|
29BR008
|
£17.05
|
LOWER TRUNNION OVERHAUL KITS
| FULL KIT
|
24SK009
|
£5.50*
|
| TOP SEAL
|
24SE010
|
£1.75@
|
| LOWER TRUNNION: (LH)
|
24BJ003
|
£18.95@
|
| LOWER TRUNNION: (RH)
|
24BJ002
|
£18.95@
|
(4 Pairs per car - 2 upper, 2 lower)
| UPPER FRONT: L/H BLACK POWDER COATED
|
COWB062
|
£82.10*
|
| UPPER FRONT: R/H BLACK POWDER COATED
|
COWB061
|
£82.10*
|
| LOWER FRONT: BLACK POWDER COATED
|
05WB058
|
£110.90*
|
The inboard ends of the Spyder tubular wishbones, for the Europa are
reinforced by unequal length wraps. The outer ends of the lower front wishbone
(where the spring /damper and trunnion attaches) have been designed to combat
bolt hole elongation. The wishbones are finished in a durable black powder coat
and are supplied with outer bolts, washers and nylocs.
RUBBER BUSHINGS FOR THE ABOVE WISHBONES
| SUPPLIED AND PRESS FITTED |
12SV005 |
£6.50@ |
ADJUSTABLE TUBULAR FRONT WISHBONES
Designed for competition use,
only.(4 pairs per car - 2 upper, 2 lower). Supplied less rod end bearings and
spacers.
| UPPER FRONT: L/H BLACK POWDER COATED |
COWB063 |
£114.05* |
| UPPER FRONT: R/H BLACK POWDER COATED |
COWB064 |
£114.05* |
| LOWER FRONT: BLACK POWDER COATED |
05WB059 |
£156.40* |
| ROD END BEARINGS |
|
£29.95 |
| ROD END BEARING SPACERS |
|
£2.75 |
THE SPYDER FRONT SUSPENSION CONVERSION WITH LOWER BALL JOINTS AND
A FORD VENTILATED DISC BRAKE SYSTEM TO SUIT THE FULL EUROPA RANGE:
(The use of this system requires 14" wheels).
| 1 x SPYDER FRONT UPRIGHT: L/H
|
29HC009
|
£175.00
|
| 1 x SPYDER FRONT UPRIGHT: R/H
|
29HC010
|
£175.00
|
| 2 x LOWER FRONT BALL SOCKETS
|
24JS003
|
£35.65
|
| 2 x LOWER FRONT BALL JOINTS
|
24BJ005
|
£23.50@
|
| 1 x WHEEL BEARING KIT: L/H
|
29BR010
|
£26.50
|
| 1 x WHEEL BEARING KIT: R/H
|
29BR011
|
£26.50
|
| 2 x SPACERS
|
29BR012
|
£11.76@
|
| 1 x HUB/STUB AXLE: L/H 4.250"
|
29HU001
|
£71.10
|
| 1 x HUB /STUB AXLE: R/H 4.250"
|
29HU002
|
£71.10
|
| 2 x CLOSING CAPS: INNER HUB
|
29HU003
|
£1.80@
|
| 2 x VENTED BRAKE DISCS: 10.250" DIAMETER
|
29BD006
|
£49.90@
|
| 1 x BRAKE CALIPER: L/H
|
29BC005
|
£197.70
|
| 1 x BRAKE CALIPER: R/H
|
29BC006
|
£197.70
|
| 1 x SET OF BRAKE PADS
|
29BP007
|
£36.50
|
*= PER SIDE **= PER PAIR.
1 3
4 5
6 7 8
9 10
11
|