|
Page 8
Issue 8002
BOLT KITS AND SPINDLES
BODY TO CHASSIS
| ELAN AND
+2 |
01BK001 |
£10.90* |
WISHBONES
| LOWER INNER REAR: ELAN AND
+2 |
21BK005 |
£9.40* |
| LOWER OUTER REAR: ELAN AND
+2 |
21BK004 |
£11.60* |
RUBBER DRIVE COUPLINGS
| ELAN AND
+2 |
01BK006 |
£39.90@ |
SPINDLES: Manufactured from stainless steel, complete with lock nuts
and washers.
| FRONT WISHBONE TO CHASSIS: ELAN & +2 |
21NB014 |
£8.95@ |
| REAR WISHBONE TO CHASSIS: ELAN & +2 |
21NB004 |
£8.95@ |
| NYLON NUTS: 1/4" UNF |
24NB031 |
£00.35@ |
| NYLOC NUTS: 5/16" UNF |
24NB032 |
£00.40@ |
| NYLOC NUTS: 3/8" UNF |
24NB033 |
£00.45@ |
| NYLOC NUTS: 7/16" UNF |
24NB034 |
£00.50@ |
| NYLOC NUTS: 1/2" UNF |
24NB035 |
£00.55@ |
| NYLOC NUTS: 9/16" UNF |
24NB036 |
£00.60@ |
| NYLOC NUTS: 5/8" UNF |
24NB037 |
£00.65@ |
NOTE: Most of the bolts listed above are specially manufactured high
tensile shear bolts and are usually supplied in a zinc plated finish.
DRILL BITS, TAPS AND CHASSIS CHANGE INSTRUCTIONS
| ELAN AND
+2 |
01BK008 |
£36.00* |
SERVICES
CHARGES ONLY. NO MATERIALS INCLUDED
WISHBONE RUBBER BUSHINGS
| REMOVE FROM FRONT OR REAR WISHBONE |
01SV021
|
£2.00@
|
| PRESS FITTED TO WISHBONES |
01SV022
|
£2.00@
|
ROAD SPRINGS
| REMOVE FROM DAMPER UNITS |
01SV023
|
£5.50@
|
| PRESS FITTED TO DAMPER UNITS |
01SV024
|
£5.50@
|
REAR HUBS AND BEARINGS
Save the possible expense of replacing the hub pullers, rear hubs or both.
| PRESSING OUT SHAFT AND BEARINGS FROM THE REAR BEARING
HOUSING. PRESS FITTING NEW BEARINGS AND ASSEMBLING ALLOY REAR HOUSING |
01SV025
|
£30.00**
|
SILL MEMBERS
| REMOVING ORIGINALS AND REPLACING WITH NEW |
--SV--
|
£100.00**
|
** = PER SIDE
1 2
3 4
5 6 7
Home
|